ErrorCodeDoctor
Whirlpool Microwave PUSH / PSH error code
The PUSH or PSH message on your Whirlpool microwave means the door needs to be pushed firmly closed to engage the latch. Push the door firmly until you hear it click into place. If PUSH or PSH persists after closing the door contact a qualified technician or schedule service as the latch may be damaged.
Common causes
- The microwave door was not pushed firmly enough to engage the latch
- The door latch mechanism has a fault
How to fix it
-
1
Push the microwave door firmly closed until you hear or feel it click into the latch
-
2
If PUSH or PSH persists after closing the door contact a qualified technician or schedule service
Related Whirlpool Microwave error codes
DOOR / OPEN and CLOSE DOOR
The microwave door is not closing or latching properly
SE
A button on the control panel is stuck or continuously pressed
ERROR (during sensor cooking)
An error occurred during sensor cooking — the sensor could not detect steam correctly
Err7
A control board fault was detected
PUSH / PSH error — frequently asked questions
What does the PUSH / PSH error mean on a Whirlpool microwave?
The microwave door needs to be pushed shut to latch properly
What causes the PUSH / PSH error?
The PUSH / PSH error is usually caused by: The microwave door was not pushed firmly enough to engage the latch; The door latch mechanism has a fault.
Can I fix the PUSH / PSH error myself?
Yes — this is rated an easy fix that most people can do themselves, typically in 5s.
How much does it cost to fix the PUSH / PSH error?
Fixing the PUSH / PSH error on a Whirlpool microwave typically costs $0–$150, depending on parts and whether you do it yourself or hire a technician.
Is it safe to keep using my microwave with the PUSH / PSH error?
In most cases yes, but it's best to address the PUSH / PSH error soon — see the fix steps below to resolve it.