ErrorCodeDoctor
Whirlpool · Microwave

Whirlpool Microwave SE error code

Difficulty: Easy · Cost: $0–$200 · Duration: 5m

The SE error on your Whirlpool over-the-range microwave means a button on the control panel is stuck or being continuously detected as pressed. This can be caused by grease, food residue, or moisture on the control panel. Clean the control panel thoroughly. If the SE error persists after cleaning contact a qualified technician or schedule service.

Common causes

  • A control panel button is physically stuck in the pressed position
  • Grease, food residue, or moisture is causing a button to register as continuously pressed

How to fix it

  1. 1

    Turn off the microwave

  2. 2

    Clean the control panel thoroughly with a damp cloth to remove any grease or food residue

  3. 3

    Press each button on the panel individually to check if any are stuck

  4. 4

    Turn the microwave back on and check if SE has cleared

  5. 5

    If SE persists contact a qualified technician or schedule service

Related Whirlpool Microwave error codes

1

DOOR / OPEN and CLOSE DOOR

The microwave door is not closing or latching properly

easy
2

ERROR (during sensor cooking)

An error occurred during sensor cooking — the sensor could not detect steam correctly

easy
3

Err7

A control board fault was detected

medium
4

F9 / F9 E0

The electrical outlet or connection may be miswired

hard

SE error — frequently asked questions

What does the SE error mean on a Whirlpool microwave?

A button on the control panel is stuck or continuously pressed

What causes the SE error?

The SE error is usually caused by: A control panel button is physically stuck in the pressed position; Grease, food residue, or moisture is causing a button to register as continuously pressed.

Can I fix the SE error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 5m.

How much does it cost to fix the SE error?

Fixing the SE error on a Whirlpool microwave typically costs $0–$200, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my microwave with the SE error?

In most cases yes, but it's best to address the SE error soon — see the fix steps below to resolve it.