ErrorCodeDoctor
Samsung · Dryer

Samsung Dryer HC / hE / HC4 / 1HC error code

Difficulty: Easy · Cost: $0–$200 · Duration: 15–20m

These codes mean your Samsung dryer is getting too hot — or in some cases on electric dryers is not heating enough due to low voltage. The most common cause of overheating is a clogged lint screen or blocked exhaust vent trapping heat. Cleaning the lint screen and vent resolves most cases. If the dryer is electric and heating too little an electrician should check the voltage supply.

Common causes

  • Lint screen is clogged causing heat to build up inside the drum
  • Exhaust vent system is blocked trapping hot air
  • Low voltage supply on electric dryers preventing adequate heating
  • Heating element or thermostat has malfunctioned

How to fix it

  1. 1

    Remove and clean the lint screen thoroughly

  2. 2

    Check the exhaust hose and outside vent for blockages and clear any lint

  3. 3

    If the dryer is electric and not heating enough contact an electrician to check the voltage supply

  4. 4

    If the error continues after cleaning arrange professional service

Related Samsung Dryer error codes

1

9C1 / 9E / 2E / 9E1

An abnormal voltage was detected in the electrical supply to the dryer

easy
2

bE / bE2 / bC2 / 6E / 6E2 / 6C2

A button on the control panel is stuck or being continuously detected as pressed

easy
3

dC / dE / dF / do / d0 / 1DC / 1dF

The dryer door is not detected as closed and latched correctly

easy
4

tS / t5 / tC / tO / t0 / tE / tE3 / tC5 / tCS / 1tC / 1tC5 / 1tCS

A temperature fault or temperature sensor fault was detected

easy

HC / hE / HC4 / 1HC error — frequently asked questions

What does the HC / hE / HC4 / 1HC error mean on a Samsung dryer?

The dryer is overheating or not heating enough

What causes the HC / hE / HC4 / 1HC error?

The HC / hE / HC4 / 1HC error is usually caused by: Lint screen is clogged causing heat to build up inside the drum; Exhaust vent system is blocked trapping hot air; Low voltage supply on electric dryers preventing adequate heating; Heating element or thermostat has malfunctioned.

Can I fix the HC / hE / HC4 / 1HC error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 15–20m.

How much does it cost to fix the HC / hE / HC4 / 1HC error?

Fixing the HC / hE / HC4 / 1HC error on a Samsung dryer typically costs $0–$200, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my dryer with the HC / hE / HC4 / 1HC error?

In most cases yes, but it's best to address the HC / hE / HC4 / 1HC error soon — see the fix steps below to resolve it.