ErrorCodeDoctor
Brother · Printer (Laser)

Brother Printer (Laser) Cooling Down / Wait for a while error code

Difficulty: Easy · Cost: $0 · Duration: 5–15m

The Cooling Down or Wait for a while message on your Brother laser printer means the internal temperature is too high. The machine has paused the print job and entered cooling down mode. The cooling fan will run during this time. Wait until the machine finishes cooling — it will resume printing automatically. Make sure all vents are clear of obstructions. If the fan is not spinning disconnect the power for several minutes then reconnect.

Common causes

  • The internal temperature of the machine has exceeded the safe operating level
  • Ventilation openings are blocked preventing adequate cooling

How to fix it

  1. 1

    Wait for the machine to finish cooling down — do not turn it off

  2. 2

    Make sure all ventilation openings on the machine are completely clear of obstructions

  3. 3

    The machine will resume printing automatically once it has cooled down

  4. 4

    If the cooling fan is not spinning disconnect the machine from power for several minutes then reconnect

Related Brother Printer (Laser) error codes

1

2-sided Disabled / 2-sided Disable

The back cover or 2-sided tray is not properly closed or installed

easy
2

Access Denied

The function you are trying to use is restricted by Secure Function Lock

medium
3

Cartridge Error / Put the Toner Cartridge back in

The toner cartridge is not installed correctly in the drum unit

easy
4

Comm. Error

A poor telephone line caused a fax communication error

easy

Cooling Down / Wait for a while error — frequently asked questions

What does the Cooling Down / Wait for a while error mean on a Brother printer (laser)?

The machine's interior is too hot and is cooling down — printing will resume automatically

What causes the Cooling Down / Wait for a while error?

The Cooling Down / Wait for a while error is usually caused by: The internal temperature of the machine has exceeded the safe operating level; Ventilation openings are blocked preventing adequate cooling.

Can I fix the Cooling Down / Wait for a while error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 5–15m.

How much does it cost to fix the Cooling Down / Wait for a while error?

Fixing the Cooling Down / Wait for a while error on a Brother printer (laser) typically costs $0, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my printer (laser) with the Cooling Down / Wait for a while error?

In most cases yes, but it's best to address the Cooling Down / Wait for a while error soon — see the fix steps below to resolve it.