ErrorCodeDoctor
Bosch · Washing Machine

Bosch Washing Machine E:36 -10 error code

Difficulty: Medium · Cost: $0–$80 · Duration: 20–30m

The E:36 -10 error means your Bosch washing machine cannot drain properly. This error is similar to E:30 -80 and involves the same range of drainage causes — a blocked or kinked hose, a hose installed too high, an unsuitable extension, a blocked pump, an incorrectly fitted pump cap, or excess suds. Work through each check systematically.

Common causes

  • Drain pipe or water outlet hose is blocked or kinked
  • Water outlet hose is installed higher than 39 inches
  • An unsuitable extension is fitted to the outlet hose
  • Drain pump is blocked
  • Pump cap is not correctly fitted
  • Too much detergent was used causing excess suds

How to fix it

  1. 1

    Clean the drain pipe and water outlet hose

  2. 2

    Check the hose for kinks and make sure it is not installed higher than 39 inches

  3. 3

    Remove any unsuitable hose extension

  4. 4

    Clean the drain pump following the instructions in your owner's manual

  5. 5

    Make sure the pump cap is screwed in all the way with the handle in a vertical position

  6. 6

    Reduce detergent dosage for future cycles

  7. 7

    If the error persists contact a qualified technician

Related Bosch Washing Machine error codes

1

CL

Child Lock is activated — the controls are disabled

easy
2

E:00 -18

The drain pump is blocked or obstructed

easy
3

E:00 -23

Water was detected in the base of the machine — possible leak

hard
4

E:10 / -00 / -10 / -20

The intelligent dosing system pump is blocked

easy

E:36 -10 error — frequently asked questions

What does the E:36 -10 error mean on a Bosch washing machine?

The machine cannot drain — multiple possible causes

What causes the E:36 -10 error?

The E:36 -10 error is usually caused by: Drain pipe or water outlet hose is blocked or kinked; Water outlet hose is installed higher than 39 inches; An unsuitable extension is fitted to the outlet hose; Drain pump is blocked; Pump cap is not correctly fitted; Too much detergent was used causing excess suds.

Can I fix the E:36 -10 error myself?

It's possible for a moderately handy person, but budget 20–30m and expect some disassembly.

How much does it cost to fix the E:36 -10 error?

Fixing the E:36 -10 error on a Bosch washing machine typically costs $0–$80, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my washing machine with the E:36 -10 error?

In most cases yes, but it's best to address the E:36 -10 error soon — see the fix steps below to resolve it.