ErrorCodeDoctor
Whirlpool · Washing Machine

Whirlpool Washing Machine F8 E1 / LO FL error code

Difficulty: Easy · Cost: $0–$80 · Duration: 10–15m

The F8 E1 or LO FL code means your Whirlpool washing machine detected that water is flowing into the drum at a lower rate than expected. This is almost always caused by a water supply issue rather than a fault with the washer itself. Checking that water valves are fully open, hoses are not kinked, and no anti-flood devices are installed on the water lines resolves most cases.

Common causes

  • Hot or cold water supply valves are not fully open
  • Water inlet hoses are kinked or bent
  • Anti-flood hoses or Flood Safe devices are installed on the water lines — these restrict flow
  • Inlet filter screens are clogged with sediment

How to fix it

  1. 1

    Make sure both the hot and cold water supply valves are fully open

  2. 2

    Check the inlet hoses for kinks and straighten them if found

  3. 3

    Remove any Flood Safe or anti-flood devices from the water line — these restrict flow and should not be used

  4. 4

    Press the Pause or Cancel button twice and then the Power button once to clear the code

  5. 5

    If the code continues contact a qualified technician or schedule service

Related Whirlpool Washing Machine error codes

1

LOC / LC

Control Lock has been activated — the control panel buttons are disabled

easy
2

dET

The detergent cartridge was not detected in the dispenser — not an error on all models

easy
3

Int

The cycle was paused or cancelled — the washer is draining and stopping

easy
4

rL / F34

Items were detected inside the drum during the Clean Washer cycle

easy

F8 E1 / LO FL error — frequently asked questions

What does the F8 E1 / LO FL error mean on a Whirlpool washing machine?

The washer is sensing a low flow of water entering the drum

What causes the F8 E1 / LO FL error?

The F8 E1 / LO FL error is usually caused by: Hot or cold water supply valves are not fully open; Water inlet hoses are kinked or bent; Anti-flood hoses or Flood Safe devices are installed on the water lines — these restrict flow; Inlet filter screens are clogged with sediment.

Can I fix the F8 E1 / LO FL error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 10–15m.

How much does it cost to fix the F8 E1 / LO FL error?

Fixing the F8 E1 / LO FL error on a Whirlpool washing machine typically costs $0–$80, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my washing machine with the F8 E1 / LO FL error?

In most cases yes, but it's best to address the F8 E1 / LO FL error soon — see the fix steps below to resolve it.