ErrorCodeDoctor
Whirlpool · Range & Wall Oven

Whirlpool Range & Wall Oven PF / PF id=27 / PF id=30 error code

Difficulty: Easy · Cost: $0 · Duration: 1m

PF on your Whirlpool range or wall oven means there has been a power failure. Press the Cancel pad to clear the display. On some models you may need to reset the time of day clock after clearing the code. This is not a malfunction — it is a notification that power was interrupted.

Common causes

  • A power outage occurred while the appliance was connected to power
  • The circuit breaker tripped

How to fix it

  1. 1

    Press the Cancel pad to clear the PF code from the display

  2. 2

    If the clock is flashing reset the time of day clock — refer to your Owner's Manual for specific steps

  3. 3

    Resume normal oven operation

Related Whirlpool Range & Wall Oven error codes

1

F9 / F9 E0

The electrical outlet or connection may be miswired — incorrect voltage detected

hard
2

C (Celsius display)

The oven is displaying temperature in Celsius instead of Fahrenheit

easy
3

Blank clock display

The clock display is hidden — a hidden feature has turned off the time of day display

easy
4

CAL

Oven calibration mode is active — the oven temperature can be adjusted

easy

PF / PF id=27 / PF id=30 error — frequently asked questions

What does the PF / PF id=27 / PF id=30 error mean on a Whirlpool range & wall oven?

A power failure has occurred — the clock may need to be reset

What causes the PF / PF id=27 / PF id=30 error?

The PF / PF id=27 / PF id=30 error is usually caused by: A power outage occurred while the appliance was connected to power; The circuit breaker tripped.

Can I fix the PF / PF id=27 / PF id=30 error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 1m.

How much does it cost to fix the PF / PF id=27 / PF id=30 error?

Fixing the PF / PF id=27 / PF id=30 error on a Whirlpool range & wall oven typically costs $0, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my range & wall oven with the PF / PF id=27 / PF id=30 error?

In most cases yes, but it's best to address the PF / PF id=27 / PF id=30 error soon — see the fix steps below to resolve it.