ErrorCodeDoctor
Whirlpool Dryer Loc error code
Loc is not an error code. It means Control Lock has been enabled on your Whirlpool dryer, which disables the control panel to prevent the dryer from being accidentally started or operated. Press and hold the Control Lock key for 3 seconds to unlock the controls. The display will count down 3-2-1 and then clear when Control Lock is disabled.
Common causes
- Control Lock was intentionally activated to prevent accidental operation
- Control Lock button was accidentally held down
How to fix it
-
1
Press and hold the Control Lock key on the control panel for 3 seconds
-
2
The display will count down 3-2-1 and clear when Control Lock is disabled
-
3
The dryer is now ready to operate normally
Related Whirlpool Dryer error codes
AF / F4 E3
Restricted airflow detected — the lint screen or exhaust vent is clogged or blocked
L2 / F4 E4
Low or no voltage detected on one leg of the power supply — the heater cannot turn on
PF
A power failure interrupted the drying cycle
F# E# (all other codes)
An internal fault was detected — the dryer control has detected a problem that requires service
Loc error — frequently asked questions
What does the Loc error mean on a Whirlpool dryer?
Control Lock has been activated — the dryer will not start or operate
What causes the Loc error?
The Loc error is usually caused by: Control Lock was intentionally activated to prevent accidental operation; Control Lock button was accidentally held down.
Can I fix the Loc error myself?
Yes — this is rated an easy fix that most people can do themselves, typically in 5s.
How much does it cost to fix the Loc error?
Fixing the Loc error on a Whirlpool dryer typically costs $0, depending on parts and whether you do it yourself or hire a technician.
Is it safe to keep using my dryer with the Loc error?
In most cases yes, but it's best to address the Loc error soon — see the fix steps below to resolve it.