ErrorCodeDoctor
LG · Dryer

LG Dryer Add Water error code

Difficulty: Easy · Cost: $0 · Duration: 2–5m

The Add Water display means your LG dryer detected that the steam feeder drawer does not have enough water to complete a steam cycle. Before running any steam cycle the steam feeder must be filled with tap water up to the MAX fill line. If the message appears after a cycle has already started it can be paused, the drawer refilled, and the cycle resumed. Do not use distilled water in the steam feeder as it can damage the steam system.

Common causes

  • Steam feeder drawer is empty or below the required water level
  • Steam feeder drawer is not fully closed after filling
  • A steam cycle was selected without filling the steam feeder first

How to fix it

  1. 1

    If the cycle has not started yet fill the steam feeder drawer with tap water up to the MAX fill line and make sure the drawer is fully closed

  2. 2

    If the message appears during a running cycle press PAUSE to temporarily stop it

  3. 3

    Remove the steam feeder drawer and fill it with tap water to the MAX fill line

  4. 4

    Do not use distilled water — use regular tap water only

  5. 5

    Make sure the drawer is completely closed after filling

  6. 6

    Power the dryer off then back on, select the STEAM cycle, and press START/PAUSE to resume

Related LG Dryer error codes

1

d75

The exhaust airflow is 75% restricted — the vent system needs cleaning

easy
2

d80

The exhaust airflow is 80% restricted — the vent system needs cleaning or inspection

medium
3

d90

The exhaust airflow is 90% restricted — urgent cleaning required

medium
4

d95

The exhaust airflow is 95% restricted — stop using the dryer immediately

hard

Add Water error — frequently asked questions

What does the Add Water error mean on a LG dryer?

The steam feeder is empty or not filled enough to run a steam cycle

What causes the Add Water error?

The Add Water error is usually caused by: Steam feeder drawer is empty or below the required water level; Steam feeder drawer is not fully closed after filling; A steam cycle was selected without filling the steam feeder first.

Can I fix the Add Water error myself?

Yes — this is rated an easy fix that most people can do themselves, typically in 2–5m.

How much does it cost to fix the Add Water error?

Fixing the Add Water error on a LG dryer typically costs $0, depending on parts and whether you do it yourself or hire a technician.

Is it safe to keep using my dryer with the Add Water error?

In most cases yes, but it's best to address the Add Water error soon — see the fix steps below to resolve it.