Bosch Dishwasher E24 / E6102 error code
The E24 or E6102 error means your Bosch dishwasher cannot drain properly. Like E22 this is caused by a blocked drain pump, a bent drain hose or a blocked air gap. The drain pump cover may also not be fully clicked into place. Clean the drain pump, check the hose, and clear the air gap to resolve this.
Common causes
- Drain pump is blocked or the pump cover is loose
- Drain hose is kinked or sharply bent
- Air gap or drain hose connection is clogged
How to fix it
-
1
Remove the drain pump cover, remove standing water and debris, replace and click the cover fully into place
-
2
Check the drain hose for kinks and straighten if found
-
3
Check and clear the air gap — disconnect the drain hose into a bucket, clear debris, reconnect, and run a rinse cycle
-
4
If the error persists contact a qualified technician
Related Bosch Dishwasher error codes
E01 / E0100
A heat pump motor circuit fault was detected at the main control board
E02 / E03 / E0103 / E0107
A main control board relay fault was detected
E04 / E0105
Faulty heater electronics were detected during self-test
E05 / E0106
A wash arm diverter circuit fault was detected at the main control board
E24 / E6102 error — frequently asked questions
What does the E24 / E6102 error mean on a Bosch dishwasher?
The drain pump is blocked, the drain hose is kinked, or the air gap is clogged
What causes the E24 / E6102 error?
The E24 / E6102 error is usually caused by: Drain pump is blocked or the pump cover is loose; Drain hose is kinked or sharply bent; Air gap or drain hose connection is clogged.
Can I fix the E24 / E6102 error myself?
Yes — this is rated an easy fix that most people can do themselves, typically in 15–20m.
How much does it cost to fix the E24 / E6102 error?
Fixing the E24 / E6102 error on a Bosch dishwasher typically costs $0–$80, depending on parts and whether you do it yourself or hire a technician.
Is it safe to keep using my dishwasher with the E24 / E6102 error?
In most cases yes, but it's best to address the E24 / E6102 error soon — see the fix steps below to resolve it.