ErrorCodeDoctor
Bosch Cooktop E7010 (Induction) error code
The E7010 code on your Bosch induction cooktop means the cooktop cannot connect to your home network or to the range hood. Switch the appliance off and back on. If the E7010 message disappears it was a temporary fault. If it reappears contact a qualified technician.
Common causes
- Home network is unavailable or the Wi-Fi signal is too weak
- Range hood connection was lost
- Temporary network or communication fault
How to fix it
-
1
Switch the cooktop off and back on
-
2
If the E7010 message disappears it was a temporary fault — no further action needed
-
3
If E7010 appears again contact a qualified technician with the exact error code
Related Bosch Cooktop error codes
dE (Electric / Induction)
Demo mode has been activated — the cooktop will not heat
D / E (Electric / Gas)
An operational fault or error was detected
E / F (Gas)
An electronics fault or error was detected on the gas cooktop
F1 / F6 (Induction)
The induction cooking zone overheated and switched off to protect the work surface
E7010 (Induction) error — frequently asked questions
What does the E7010 (Induction) error mean on a Bosch cooktop?
The induction cooktop cannot connect to the home network or to the range hood
What causes the E7010 (Induction) error?
The E7010 (Induction) error is usually caused by: Home network is unavailable or the Wi-Fi signal is too weak; Range hood connection was lost; Temporary network or communication fault.
Can I fix the E7010 (Induction) error myself?
Yes — this is rated an easy fix that most people can do themselves, typically in 1m.
How much does it cost to fix the E7010 (Induction) error?
Fixing the E7010 (Induction) error on a Bosch cooktop typically costs $0–$150, depending on parts and whether you do it yourself or hire a technician.
Is it safe to keep using my cooktop with the E7010 (Induction) error?
In most cases yes, but it's best to address the E7010 (Induction) error soon — see the fix steps below to resolve it.